MFS 38 cal (.357) 158gr JHP Bullets – 357 Magnum – Brand New

The MFS cal 158gr JHP is a .357 inch diameter jacketed hollow point projectile built for loading the 357 Magnum, and it gives revolver reloaders a proven bullet at a fair price. These are the same bullets Norma uses in its Safeguard line of 357 Magnum ammunition, made by MFS in Europe. Each box is marked 357 Magnum, and the hollow point cavity is tuned specifically for that cartridge. If you load your own magnum defense or range rounds, this is a serious component to keep on hand.

What the MFS cal 158gr JHP Is Built For

This is a 158 grain jacketed hollow point bullet, not loaded ammunition, intended for handloaders assembling 357 Magnum cartridges. The 158 grain weight is the classic magnum bullet mass, striking a balance of velocity, penetration, and recoil that revolver shooters have relied on for generations. Because these projectiles feed the Safeguard 357 Magnum line, you get factory grade consistency in a component you load yourself. The 357 Magnum hollow point here runs a slightly narrower cavity than the 38 Special version, averaging around 0.094 inch versus roughly 0.124 inch, which reflects the higher velocity of the magnum round.

The 357 Magnum has earned its reputation over decades of duty holsters and hunting camps, and the 158 grain hollow point is the load that built it. Feeding your revolver with the same projectile the factories load lets you match that proven performance while controlling your own cost per round.

Handloading also lets you tailor the recipe to the gun in your hand. A four inch service revolver, a snubby, and a long barreled hunting wheelgun all like slightly different loads, and building your own means you can tune velocity and crimp for each.

Keep your brass, primers, and powder matched and organized, and a magnum load comes together quickly at the press. That consistency is what turns a box of components into ammunition you trust.

Key Features of the MFS cal 158gr JHP

• True .357 inch diameter for 357 Magnum reloading
• Classic 158 grain weight for balanced velocity and penetration
• Jacketed hollow point profile designed to expand at magnum speed
• Same bullet Norma loads in its Safeguard 357 Magnum ammunition
• Made by MFS in Europe with consistent, brand new quality
• Narrower magnum hollow point cavity averaging about 0.094 inch

Specifications Woven Into the Load

Every projectile weighs 158 grains and measures .357 inch, the correct diameter for 38 and 357 caliber revolvers. The jacketed hollow point construction wraps a lead core in a copper jacket, which controls fouling and helps the bullet open reliably at 357 Magnum velocities. Box quantities are offered in 500 count and 1500 count, so you can buy enough to feed a long load development session or a full competition season. Work up your charge from published 357 Magnum data, keeping in mind that hollow point performance is tied to the velocity your barrel produces. Chronograph your results to confirm you are landing in the window this bullet was designed for.

Practical Use, Care, and Compatibility

Load these into 357 Magnum brass for full magnum performance, and be aware they will also chamber in 38 caliber revolvers when seated in the correct cases. Keep your seating and crimp consistent, since a firm roll crimp helps magnum loads burn cleanly and shoot to the same point of aim. Store the bullets in their sealed carton, dry and away from solvents, so the jackets stay bright until you are ready to reload. Reloaders can round out a magnum bench with brass, primers, and dies from the rest of our shooting accessories and gear. These components ship direct where state and local law allows.

For revolver shooters who want factory grade hollow points to feed the 357 Magnum, the MFS cal 158gr JHP is a smart, affordable choice. Ships direct to your door, no FFL required.