Norma 338 Cal 250gr HPBT GTX match bullets

The Norma cal 250gr HPBT is a .338 caliber hollow point boat tail match grade bullet, delivered 50 to a factory box and made in Sweden. This is a heavy, high ballistic coefficient projectile built for long range precision in the 338 cartridges. The hollow point boat tail profile cuts drag and resists wind, which is exactly what target shooters and long range hunters chase. Every bullet is brand new, with no blems, seconds, or pulls in the box, so you get consistent match quality from the first round.

What the Norma cal 250gr HPBT Is and Who It Is For

These are 250 grain, .338 inch hollow point boat tail match bullets for reloading, not loaded ammunition. The heavy 250 grain weight combined with a sleek boat tail gives this projectile the sectional density and ballistic coefficient that long range shooters value. In the big 338 magnums, a bullet like this holds velocity and bucks wind far downrange, tightening groups at distances where lesser bullets fall apart. That makes it a strong choice for precision rifle competitors and hunters stretching their 338 to the limit. Anyone loading a 338 Lapua, 338 Norma, or similar case will feel at home here.

Long range shooting lives and dies on consistency, and a match grade bullet is only as good as the load built around it. That is where handloading a heavy 338 shines, letting you tune seating depth and charge until your velocity spread shrinks to single digits.

The 250 grain weight and boat tail design give this bullet the ballistic coefficient to hold energy and buck wind far past where lighter projectiles fade. A factory box of 50 is enough to run a proper load workup and still keep a stack for practice at distance.

For the competitor or long range hunter, a proven match handload is a real edge on the clock and in the field. Build it carefully and it will print tight groups well past where the wind starts to matter.

Key Features of the Norma cal 250gr HPBT

• Heavy 250 grain weight for high sectional density and retained energy
• Hollow point boat tail profile for a high ballistic coefficient
• Match grade construction for tight, repeatable groups
• True .338 inch diameter for the 338 magnum family
• Made in Sweden and packed 50 to a factory box
• Brand new bullets, never blems, seconds, or pulls

Specifications Woven Into the Load

Each bullet weighs 250 grains and measures .338 inch, sized for the full range of 338 cartridges. A factory box holds 50 match grade projectiles, enough for serious load development and a stack of precision strings. The boat tail base eases the bullet through the transition from bore to air and lowers drag, while the hollow point meplat keeps the nose consistent. Because match accuracy depends on uniform velocity, build your load from published 338 data and tune seating depth carefully. Chronograph every workup so you can chase the single digit velocity spread that long range shooting rewards.

Practical Use, Care, and Compatibility

Load these into quality 338 Lapua, 338 Norma Magnum, or similar brass, and match your powder to the heavy bullet and long barrel these cartridges favor. Handle the bullets carefully so the meplats stay uniform, since tip damage can open up groups at distance. Store the factory box dry and flat so the projectiles stay pristine until load day. Complete a long range reloading kit with brass, powder, and primers from the rest of our precision shooting gear. This match grade Norma bullet ships direct where state and local law allows.

For 338 shooters who demand match consistency and long range reach, the Norma cal 250gr HPBT is a bullet worth building a load around. Ships direct to your door, no FFL required.