ADG 7mm PRC Brass – 50 ct Box

The ADG PRC brass is brand new 7mm PRC reloading brass, engineered by ADG not only for consistency but for real durability under the pressures of a modern magnum. It ships in a 50 count orange ammo box that protects your cases in transit and doubles as storage. ADG builds strength into this brass by adding material in specific areas, which makes it heavier and changes its internal volume compared to other makers. For handloaders building precision 7mm PRC loads, this premium brass is a foundation designed to last.

What the ADG PRC Brass Is and Who It Is For

This listing is for 7mm PRC brass, a reloading component rather than loaded ammunition. The 7mm PRC, or Precision Rifle Cartridge, is a modern long range standout that pushes high BC 7mm bullets with efficiency and reach. ADG designed this brass for consistency and durability, adding material to the case in specific areas to strengthen it against repeated full pressure firings. Because that added material makes the brass heavier and reduces internal volume, it will generally require lower charge weights than other brass to reach the same pressures and velocities. Precision shooters and long range hunters loading the 7mm PRC are exactly who this brass was built for.

The 7mm PRC has quickly become a long range darling, pushing sleek, high BC bullets with efficiency and reach that shooters love. Feeding it with brass engineered for strength and consistency lets you get the most out of the cartridge over a long case life.

The heavier ADG construction reduces internal volume, which means this brass is not a drop in for another maker’s recipe. Treat load development as a fresh project, work up from reduced starting charges, and you will have a precision round tuned to your rifle.

For the long range shooter chasing the 7mm PRC’s flat trajectory, durable brass is a foundation that keeps paying off. Develop a careful load and it will hold up through many firings.

Key Features of the ADG PRC Brass

• Brand new 7mm PRC brass in a 50 count orange ammo box
• Material added in specific areas to strengthen the case
• Engineered for consistency and long term durability
• Heavier construction with reduced internal case volume
• Protective ammo box that doubles as storage
• Built for precision long range and hunting loads

Specifications Woven Into the Load

You get 50 pieces of new 7mm PRC brass packaged in a durable orange ammo box. Because ADG adds material to strengthen the case, this brass is heavier than most and holds less volume inside, so it requires lower charge weights to hit the same pressures and velocities as lighter brass. ADG recommends using a reputable load data source and working up from the recommended minimum starting loads. Failure to reduce charge weights established with other manufacturers brass may result in higher pressures and velocities and could reach unsafe levels. Treat this as a fresh load development project and confirm your results over a chronograph.

Practical Use, Care, and Compatibility

Use this brass in a rifle chambered for 7mm PRC, and pair it with high BC 7mm (.284 inch) bullets for long range performance. Prep consistently, full length or neck size to your chamber, and develop your load from scratch rather than transferring an old recipe. Store the cases in the orange box so they stay protected and organized through many reload cycles. Complete a precision reloading kit with 7mm bullets, powder, and primers from the rest of our long range reloading gear. This brass ships direct where state and local law allows.

For the 7mm PRC handloader who wants durable, consistent brass and a protective box, the ADG PRC brass is a premium choice. Ships direct to your door, no FFL required.