Cutting Edge Bullets .366/9.3mm 280gr Safari Solid – 50ct Box

These Cutting Edge Bullets .366/9.3mm 280gr Safari Solid projectiles are precision machined big bore hunting bullets built for uncompromising penetration. Turned from solid material, the Cutting Edge Bullets .366/9.3mm design is made for bolt action rifles as well as double rifles, making it a natural fit for classic 9.3mm cartridges. They come in a 50 count box as reloading components, not loaded ammunition. If you hunt large, tough game with a 9.3mm rifle, these bullets deserve a place on your bench.

What the Cutting Edge Bullets .366/9.3mm Safari Solid are

The Cutting Edge Bullets .366/9.3mm Safari Solid measure .366 inches in diameter and weigh 280 grains, a stout weight that delivers strong sectional density in the 9.3mm class. As a lathe turned solid, it retains full weight and drives straight and deep without breaking apart. It is a reloading component only, not primed or loaded until you build it.

This bullet suits hunters loading the 9.3×62, 9.3x74R, and other 9.3mm cartridges for large, dangerous, or heavy bodied game. The Safari Solid design uses a three plus one band configuration to reduce barrel strain, and the 67 percent meplat BBW number 13 nose profile has proven to give the deepest penetration of any bullet the maker has tested to date.

Key features of these Safari Solid bullets

• Solid construction for full weight retention
• Heavy 280 grain weight for deep penetration
• Three plus one band configuration to reduce barrel strain
• 67 percent meplat BBW number 13 nose profile
• Designed for bolt action and double rifles
• Packaged in a 50 count box

Specifications and details

The grain weight is 280 gr and the diameter is .366 inches, and each box holds 50 bullets. Because the projectile is machined as a solid, there is no core to separate and no jacket to shed, so it penetrates on a straight, predictable path through heavy bone and muscle. The wide flat meplat crushes tissue as it drives, which is why this design is known for its penetration.

The driving bands ride the rifling with reduced bearing surface, which lowers barrel strain and can help with pressure and fouling. This is a dedicated big game and dangerous game bullet, not a general purpose target projectile.

Reloading, care, and compatibility

Solid bullets run longer than lead core bullets of the same weight, so watch your seating depth and confirm stabilization in your barrel’s twist rate. Use published data for your specific 9.3mm cartridge, start below maximum, and work up while watching for pressure signs. Store the bullets dry and clean until you load them.

These bullets seat with standard .366 and 9.3mm dies and chamber in any rifle cut for your 9.3mm cartridge. Read more about the maker at Cutting Edge Bullets, then browse our apparel and gear category for 9.3mm brass and primers.

Big bore 9.3mm performance

The 9.3mm bore has a long, proud history in the hunting fields of Europe and Africa, feeding cartridges like the 9.3×62 and the 9.3x74R. A heavy, purpose built solid in this diameter turns those rifles into serious tools for large, heavy bodied, and dangerous game, where deep penetration is the difference between success and trouble.

This machined solid is built around that mission. The stout 280 grain weight brings strong sectional density, the wide flat meplat crushes a broad wound channel, and the banded design reduces bearing surface to ease barrel strain. There is no core to separate and no jacket to shed, so the bullet drives straight through even heavy bone.

Because solids run longer than lead core bullets of equal weight, confirm your seating depth and stabilization before committing to a load. A 50 count box supports thorough load development for your 9.3mm cartridge. Store the bullets dry, work up carefully, and trust this design when penetration truly matters.

Trust your big bore loads to Cutting Edge Bullets .366/9.3mm Safari Solid projectiles on your bench. Ships direct to your door, no FFL required.