The Nightforce Ultralite Rings in 34mm at a taller 1.125 inch height give large optics the clearance they need while holding zero like steel and weighing far less. Machined from 7075-T6 aluminum with titanium crossbolts and jaws, this pair pairs serious clamping strength with a genuinely light footprint. Shooters mounting big-objective scopes over chunky rails reach for the Nightforce Ultralite Rings when standard heights come up short. When your optic needs room and your rifle needs to stay light, this is the answer.
What the Nightforce Ultralite Rings Are and Who They Are For
This is a pair of 34mm rings at a 1.125 inch height, the taller option for scopes with large objective bells or oversized turrets. It fits precision and hunting builds where a low mount would leave the objective too close to the barrel or rail. The extra height ensures proper clearance without forcing you into heavy steel rings.
Long-range shooters running big glass are the ideal customer, especially on rifles with tall rails or large-diameter objectives. If your scope needs a little more room to breathe, these are the rings that provide it while keeping weight in check.
The added height also opens up a more upright, comfortable head position on rifles with tall combs or adjustable cheek pieces. That comfort translates into a steadier, more repeatable position over a long day behind the gun. Getting clearance and cheek weld right at the same time is exactly what this height is meant to do.
Key Features
- 34mm ring diameter accepts large-tube precision and tactical optics.
- Taller 1.125 inch height clears big objective bells and generous turrets.
- Machined 7075-T6 hard anodized aluminum bodies deliver steel-like strength at reduced weight.
- Titanium crossbolts and jaws provide powerful, secure clamping with minimal mass.
- Strength well beyond that normally found in lightweight rings.
- Hard-anodized finish stands up to weather and hard field use.
Specifications and Build
The bodies are machined from 7075-T6 aluminum and hard anodized, which delivers durability and corrosion resistance in a lightweight package. That aluminum grade is the reason the rings can stay light while still clamping the tube firmly. Titanium crossbolts and jaws carry the load, matching the holding power of steel while cutting weight from the rifle’s balance point.
The 1.125 inch height is the practical difference here, giving big objectives and large turrets the space they require above the rail. That clearance lets you run a large scope without contact or compromise. As with the rest of the Ultralite line, the payoff is strength well beyond typical lightweight rings.
Practical Use, Care, and Compatibility
Mount these rings on a Picatinny base, level the scope, and torque the cap screws in a cross pattern to the recommended value with a quality wrench. Even torque protects the tube and preserves optical clarity across the full magnification range. Recheck crossbolt tension after break-in and periodically thereafter, especially on rifles with heavy recoil.
Test-fit the objective bell before final torque to confirm the extra height gives you the clearance you were after. Pair the rings with an adjustable comb or a cheek riser to make the most of the taller mounting position. Small adjustments at the bench turn good clearance into a genuinely comfortable shooting position.
Finish your setup with the right optic from our full optics collection, where mounts and scopes are ready to be paired. The Nightforce reputation for mounts that never quit stands behind this taller ring set. Install them properly and your big optic will sit secure for the long haul.
Extra clearance, light weight, and a bombproof hold define the Nightforce Ultralite Rings in this 1.125 inch height. Ships direct to your door, no FFL required.
Reviews
There are no reviews yet.