Ships nationwide to your FFL. We handle the transfer paperwork.

Glock

Faxon 10mm PCC Blowback Full‑Mass Nitride Bolt Carrier Group For Glock®

✓ In stockSKU OF-PART-00498

$152.00

Faxon 10mm PCC Blowback Full‑Mass Nitride Bolt Carrier Group For Glock® from Glock. In stock and ready to ship direct to your door.

Ships direct to your door. No FFL required, shipped where state and local law allows.

Zelle · Cash App · PayPal · Crypto · Venmo accepted, with discounts up to 5% at checkout. No card charged online.

  • In stock, ships fast
  • Secure checkout
  • Real people, real support

See the firearms this is built for

SKU: OF-PART-00498 Categories: ,

The faxon pcc blowback full-mass Nitride Bolt Carrier Group for Glock is designed specifically for 10mm blowback-operated AR-style pistol caliber carbines. Building on the success of Faxon 9mm BCG, this 10mm version features a scaled-up full-mass body for improved recoil management and smoother cycling. If you run a 10mm PCC on a Glock-pattern lower, this is the carrier engineered to make it behave.

What the faxon pcc blowback full carrier is and who it is for

Made by Faxon, this BCG is built for shooters running 10mm pistol caliber carbines on Glock-pattern magazines and lower receivers. Blowback 10mm guns generate a lot of energy, and the scaled-up full-mass body is there to soak it up, taming the recoil impulse and smoothing out the cycle so the gun runs flatter and more predictably.

Engineered around Glock-pattern feed geometry, the faxon pcc blowback full-mass carrier is optimized to maintain proper feeding and reliable function, which is exactly what a hard-recoiling 10mm needs to run right.

Key features of the 10mm PCC BCG

  • Full-mass body scaled up for 10mm to improve recoil management and smooth cycling.
  • Machined from MIL-SPEC 8620 steel with a salt bath nitride finish for wear resistance.
  • Engineered for Glock-pattern magazines and lower receivers for proper feed geometry.
  • User-removable weight system that lets you fine-tune the setup without custom machining.
  • Heat-treated M16-style profile for reliable, repeatable function.

Specs and construction

The carrier is crafted from MIL-SPEC 8620 steel and finished with a salt bath nitride treatment, offering exceptional wear resistance and long-term durability under the high-stress conditions a blowback 10mm creates. That material and finish pairing is proven to survive the pounding a full-mass PCC carrier absorbs.

One of the standout details is the user-removable weight system, which lets shooters fine-tune their setup without custom machining or permanent modifications. That adjustability makes the carrier equally at home on suppressed and unsuppressed builds, since you can add or remove mass to match your load and configuration.

Practical use, care, and compatibility

This carrier is built for AR-style 10mm PCCs that use Glock-pattern magazines and lowers, so confirm your build follows that pattern before installing. Because it is a full-mass blowback design, it works with the recoil impulse rather than a locked-breech action, and the removable weights let you tune reliability against your specific ammunition and whether you shoot suppressed.

Keep it clean like any blowback carrier, since these systems run dirtier than gas-operated guns: wipe the body down, clear carbon, and keep it lubricated. Inspect the weight system and fasteners periodically. To match it with a compatible charging handle or muzzle device, browse our full parts and upgrades selection. For a smoother, tunable 10mm PCC, the faxon pcc blowback full-mass carrier is a serious upgrade.

Blowback pistol-caliber carbines live and die by carrier mass, and getting that balance right is exactly what the removable weight system is for. Too little mass and the gun feels violent or short-strokes on light loads; too much and it feels sluggish. The ability to tune without machining lets you dial the gun to your ammunition and to whether you run a suppressor.

These systems also run dirtier than gas-operated rifles, so plan on more frequent cleaning of the carrier and chamber area. Keep the body wiped down and lubricated, and inspect the weight fasteners periodically. Built on Glock-pattern geometry with a durable nitride finish, it is designed to make a hard-recoiling 10mm behave like a much softer gun.

For anyone serious about a 10mm pistol-caliber carbine, the ability to tune the carrier to the load is a feature you will use more than you expect. It turns a finicky blowback platform into a smooth, predictable shooter that runs the ammo you actually own.

Scaled-up mass, tunable weights, and Glock-pattern reliability, this 10mm BCG makes a hard-recoiling carbine easy to run. Ships direct to your door, no FFL required.

Brand

Glock

Caliber

10mm

Material

steel

Reviews

There are no reviews yet.

Be the first to review “Faxon 10mm PCC Blowback Full‑Mass Nitride Bolt Carrier Group For Glock®”

Your email address will not be published. Required fields are marked *

18+/21+

We check age at checkout. 18 for long guns, 21 for handguns.

FFL

Every firearm ships to a licensed FFL for pickup. We never ship a gun to your door.

USA

We ship to all 50 states and block anything your state does not allow at checkout.

SSL

Ordering is secure. We set up payment with you directly, no card charged online.