Nightforce NX8 4-32X50mm F2 w/ MOAR-CF2D Reticle (C641)

The Nightforce NX8 4-32x50mm F2 with the MOAR-CF2D reticle packs true long range capability into a remarkably compact package. It is built on the rugged, repeatable legacy the brand established over more than 20 years with the NXS line, and it delivers an 8x zoom ratio without asking you to hang a fence post over your action. The optical system is built around ED lenses, so the short body does not come at the cost of the view. This is a lot of magnification in a scope that does not dominate the rifle.

Who the Nightforce NX8 4-32x50mm F2 Is For

This one is aimed at hunters and shooters who want a reticle that stays one consistent size through the entire magnification range. That is the practical argument for a second focal plane design: the aiming point never gets so fine that it disappears at low power, and never gets so coarse that it covers the target at high power.

If you shoot game at distance, ring steel well past the point where wind matters, or simply prefer a crisp, unchanging reticle to a scaling one, the Nightforce NX8 4-32x50mm F2 fits the way you already shoot. The 4x bottom end keeps a workable field of view for finding animals, and the 32x top end is there when you need to pick a small target apart.

Key Features

• 8x zoom ratio from 4x to 32x in a notably short overall package.
• MOAR-CF2D second focal plane reticle with dual scale calibration, numbered at both 16x and 32x with a calibrated mark on the power change ring.
• Open center with a dot and intuitive numbering, so the target stays clear and holds anywhere in the reticle are fast.
• ED lens optical system that protects image quality despite the compact body.
• ZeroStop turret and Digillum reticle illumination, the features serious shooters expect from this brand.
• Power throw lever for fast magnification changes under time pressure.

Specifications in Plain English

The core figures are a 4-32x magnification range, a 50mm objective lens, a second focal plane MOAR-CF2D reticle and an 8x zoom ratio, with Digillum illumination and a ZeroStop turret. The dual scale calibration is the clever part. Reticle numbering is valid at 16x and again at 32x, and a calibrated mark on the power change ring tells you which scale you are on, so you can choose a wide field of view or maximum detail and still hold with accurate subtensions.

A 50mm objective keeps the exit pupil sensible at high magnification, which is what makes 32x usable rather than merely available. This model comes from Nightforce and sits alongside the rest of our long range glass, so it is worth putting it next to the other options in our optics and scopes category before you decide.

Mounting, Care and Field Use of the Nightforce NX8 4-32x50mm F2

High magnification punishes a sloppy setup, so mount this scope with care. Match your rings or one piece mount to the tube, choose a height that lets your head rest naturally on the stock at full power, level the reticle to the rifle, and torque every screw to the mount maker specification. Set parallax deliberately at the distance you are shooting, because at 32x a small parallax error moves your point of impact more than most shooters realise.

Maintenance is simple and worth doing. Keep caps on in transit, clear dust with air before touching the lenses, use proper optical cleaner, and switch the Digillum illumination off when the rifle goes back in the safe. Verify the ZeroStop return after travel or a hard knock, and record which reticle scale you used with each dope entry so your notes still make sense next season.

For a compact scope that reaches a very long way without dominating the rifle, the Nightforce NX8 4-32x50mm F2 is hard to argue with. Ships direct to your door, no FFL required.