Cyclone Small Pistol Hard Case – Black

The Cyclone Small Pistol Hard Case in black is a tough, Australian designed hard plastic case built to keep a high value handgun protected, secure and motionless in transport and storage. It is the sort of case you buy once and then stop thinking about, because everything on it addresses a way cheap cases fail. Motionless is the key word, since internal movement is what scratches finishes and knocks optics out of zero.

At just 0.85 kilograms it adds almost nothing to your load. That matters when the case is going into a range bag alongside ammunition, ear protection and everything else you carry.

What the Cyclone Small Pistol Hard Case Protects

External dimensions run 31 by 25.5 by 8 centimeters around an internal space of 30 by 19.5 by 7 centimeters, sized right for a pistol and its essentials. That is a compact footprint by design, meant for one handgun rather than a collection.

Inside, pick out foam in the base lets you cut a custom cavity around your exact firearm, so the gun sits in a pocket shaped for it instead of sliding around in a generic tray. Egg shell foam in the lid presses everything gently into place from above and takes up the remaining slack.

This suits the owner of a handgun worth protecting properly, the shooter who travels with a pistol and a red dot, and anyone who wants a lockable case rather than a padded pouch. It is equally at home in a safe, a range bag or a checked airline bag.

Features That Set It Apart

The details below are where a serious hard case separates itself from a plastic box with a handle.

• Pick out base foam for a custom cavity cut to your exact firearm
• Egg shell lid foam that eliminates internal movement completely
• Two locking clips that hold the lid tight under handling
• Two moulded padlock recesses for secure, lockable transport
• Deflective ribs reinforcing the hinge points against failure
• Rated from minus 10 to 60 degrees Celsius for hot trunks and cold truck beds

Specifications and Why They Matter

The 30 by 19.5 by 7 centimeter interior is the number to measure against. Compare it to your pistol with any optic or light attached, because accessories are what usually push a handgun out of a small case.

The hinge reinforcement deserves attention. Hinge points are traditionally the first place a hard case fails, and the deflective ribs on the Cyclone Small Pistol Hard Case exist specifically to spread that stress rather than let it concentrate.

The temperature rating of minus 10 to 60 degrees Celsius covers realistic storage conditions. A car parked in summer sun gets extremely hot inside and a winter truck bed gets genuinely cold, and a case that warps or turns brittle in either is no case at all.

Setting It Up, Locking It and Caring for It

Cut the pick out foam carefully and only once. Lay the unloaded pistol on the foam, mark the outline, then remove cubes a few at a time until the gun drops in with a snug fit, leaving foam walls between the cavity and any magazine or accessory pockets you cut alongside.

Use both padlock recesses rather than one when you need real security, and choose padlocks with a shackle sized to pass through cleanly. Two locking clips plus two locks is what makes the Cyclone Small Pistol Hard Case suitable for transport situations that require a locked container.

Care is easy. Wipe the shell with a damp cloth, keep grit out of the clip mechanisms, and let the foam dry fully if it ever gets damp. Storage cases, range bags and other transport gear are available throughout our apparel and gear collection.

For a compact, lockable, genuinely tough case that keeps a handgun exactly where you put it, this one earns its place. Ships direct to your door, no FFL required.