Ships nationwide to your FFL. We handle the transfer paperwork.

Radian

Radian Talon 45/90 2-Lever Ambi Safety Selector Kit – Tungsten

✓ In stockSKU OF-PART-00144

$58.45

Radian Talon 45/90 two lever ambi safety selector kit in Tungsten, modular 45 or 90 degree throw, fits AR-15, AR-10/SR25, MCX and MPX.

Ships direct to your door. No FFL required, shipped where state and local law allows.

Zelle · Cash App · PayPal · Crypto · Venmo accepted, with discounts up to 5% at checkout. No card charged online.

  • In stock, ships fast
  • Secure checkout
  • Real people, real support

See the firearms this is built for

SKU: OF-PART-00144 Categories: ,

Firearms this is built for

Guns on the same platform.

Model variants differ. Confirm fit against your exact model and generation before ordering, or ask us and we will check for you.

The Radian Talon 45/90 2-Lever Ambi Safety Selector Kit in Tungsten upgrades the control your firing hand touches more than any other on the rifle, and it does it with true ambidextrous function plus your choice of throw. Radian’s modular design lets the selector install as a 90 degree standard throw or a 45 degree short throw, and switching between the two is as simple as rotating the shaft 180 degrees inside the lower receiver. One part therefore covers two very different manipulation preferences without a second purchase or a second trip to the parts bin.

What the Radian Talon 45/90 2-Lever Kit Is and Who It Is For

A safety selector is a small component with an outsized effect on how a rifle feels under speed. The mil spec part in your lower works, but it is one sided, coarse, and rarely lands where your thumb naturally rests. This kit replaces it with a precision machined assembly that puts a lever on both sides of the receiver.

This is a part for the shooter who runs the gun rather than the one who admires it in the safe. Competitors chasing a shorter sweep, left handed shooters tired of reaching across the receiver, and anyone who shoots from both shoulders will notice the difference on the first drill. Builders finishing a nice lower also appreciate that the machining and finish from Radian look every bit as good as the rest of the parts list.

Key Features

  • Selectable throw: install as a 45 degree short throw or a 90 degree standard throw simply by rotating the shaft 180 degrees.
  • Two levers included, one short and one long, so each side of the rifle can be configured independently for your grip.
  • Screwless dovetail attachment with a spring loaded retention stud, so there is nothing to back out, strip, or shear under recoil.
  • Machined from aircraft grade aluminum for a strong assembly that adds no meaningful weight to the lower.
  • Tungsten finish, a neutral grey that complements black, Flat Dark Earth, and multi tone builds equally well.
  • Broad platform compatibility across AR-15, AR-10 or SR25 pattern, MCX, and MPX lowers.

Specifications, Materials, and Fit

The Radian Talon 45/90 2-Lever kit is machined from aircraft grade aluminum, which keeps the assembly light while standing up to the repeated impact a selector absorbs over thousands of rounds. Both levers ship in the box, the short and the long, so there is no follow up purchase to make once the part arrives.

Attachment is where this design separates itself from the crowd. Instead of set screws that can loosen or strip, the levers lock onto the shaft through a precision machined dovetail interface captured by a spring loaded retention stud. The connection is positive, repeatable, and easy to service without thread locker or a torque wrench.

Throw is user selectable at install, 45 degrees for a short and fast sweep or 90 degrees for the familiar travel most shooters learned on. Fitment covers most semi automatic AR-15 and AR-10 or SR25 pattern rifles along with MCX and MPX platforms, and the grey Tungsten finish is the understated option in the color lineup.

Installation, Use, and Care

Installation follows the same path as any AR selector. Clear the rifle, separate the upper from the lower, release the selector detent and spring, and slide the old part out. Orient the shaft for the throw you want, then place the levers so the long one falls under the pad of your firing thumb.

Most shooters run the long lever on the strong side and the short lever on the weak side, which keeps the selector from digging into a knuckle during long strings of fire. Spend a few minutes on a cleared rifle confirming the detent clicks positively in both positions and that the levers clear your grip.

Maintenance is close to nothing. Wipe the levers down when you clean the lower, keep grit out of the detent channel, and leave a light film of oil on the shaft. If you are building the rest of the rifle to match, our build kits and receivers section carries the lowers and control parts that pair naturally with this selector.

Few upgrades in this price range change the feel of a rifle as immediately as a good selector does. The Radian Talon 45/90 2-Lever kit gives you ambidextrous access, two throw options, and a screwless lockup built to outlast the rest of the build. Ships direct to your door, no FFL required.

Brand

Radian

Platform

Material

aircraft-grade aluminum

Throw

Selectable 45 or 90 degree

Levers

2 included, short and long

Attachment

Dovetail with spring loaded retention stud

Fits

AR-15, AR-10/SR25, MCX, MPX

Finish

Tungsten

Reviews

There are no reviews yet.

Be the first to review “Radian Talon 45/90 2-Lever Ambi Safety Selector Kit – Tungsten”

Your email address will not be published. Required fields are marked *

18+/21+

We check age at checkout. 18 for long guns, 21 for handguns.

FFL

Every firearm ships to a licensed FFL for pickup. We never ship a gun to your door.

USA

We ship to all 50 states and block anything your state does not allow at checkout.

SSL

Ordering is secure. We set up payment with you directly, no card charged online.