The Trijicon RMR Type MOA lineup is the benchmark for slide mounted red dots, and this Type 2 model with a 3.25 MOA dot is the configuration most shooters end up choosing. It uses a patented housing shape that absorbs impacts and diverts stresses away from the lens, plus upgraded electronics proven on slide ride pistols and small arms. It is a sight designed to be beaten on and keep working.
Why the Trijicon RMR Type MOA Housing Design Matters
Miniature red dots fail at the lens far more often than anywhere else. The RMR housing is shaped specifically to take an impact and route that stress around the glass instead of through it, which is why the design has become the reference standard for duty and defensive use.
The Type 2 generation added redesigned and upgraded electronics on top of that housing. Slide mounted optics live through violent acceleration on every shot, and the Type 2 electronics were built specifically to survive that environment.
It is suited to military and law enforcement use, concealed carry self defense, target shooting, and hunting. That is a broad list, and this sight genuinely covers all of it.
Key Features
- Patented housing shape that absorbs impacts and diverts stress away from the lens
- 3.25 MOA dot size, a balance of precision and fast target acquisition
- Adjustable LED with easy to use buttons on both sides of the optic
- Manual and automatic brightness modes, switchable by the user at will
- Automatic reversion to auto mode 16.5 hours after the last button press
- Upgraded Type 2 electronics proven on slide ride pistols and other small arms
Dot Size, Brightness Control, and the 16.5 Hour Rule
Choosing a Trijicon RMR Type MOA value is a real decision, not a preference. A 3.25 MOA dot subtends 3.25 inches at 100 yards, which is small enough for precise shots at distance and large enough to find quickly during a fast presentation. Larger dots are faster up close but cover more of a distant target, and smaller dots are harder to pick up under stress.
The brightness system is thoughtfully done. Side buttons let you adjust illumination, toggle between manual and automatic modes, and power the optic down for storage. If you select manual mode, the RMR stays there for 16.5 hours after the last button press and then defaults back to automatic, so a sight left in a bad manual setting will still be ready for your next task. Details on the full range are available from Trijicon.
Practical Use, Care, and Mounting
Mounting a Trijicon RMR Type MOA sight is where most red dot installations go wrong. Use the correct plate or a slide milled to the RMR footprint, degrease the screws and threads, apply the specified thread locker, and torque to the manufacturer’s specification with an actual torque driver. Guessing at torque is the single most common cause of a dot that will not hold zero.
Co witness your irons if the gun has them. Suppressor height sights that sit in the lower third of the window give you a backup aiming reference and help you find the dot when your presentation is imperfect.
Keep the lens clean with a microfiber cloth, and check screw tension every few hundred rounds during the first thousand. Replace the battery on a calendar schedule rather than waiting for a failure. Compare mounts, plates, and backup sights in our optics category when you set the gun up.
Final Assessment
There are cheaper red dots and there are lighter red dots. There are very few with this much documented service history on hard used guns, and none with more influence on how modern pistol optics are designed.
If the sight has to work when it counts, buy the one that other manufacturers copy. Ships direct to your door, no FFL required.
Reviews
There are no reviews yet.